Operation Manual

SFX SERIES USER’S GUIDE
Rev 2.2 130
Column/Field Description
NET port(s) enabled This is a check box, which is used to enable or disable all network devices that are capable of
IP data output. Generally, this will affect data output at the Ethernet (NET1/eth0 and
NET2/eth1) ports.
Radio Buttons Clicking on the radio button will select a PID in the list. Once selected, you can use the Edit
Selected button to edit the PID definition or Delete Selected to delete the PID from the list.
Only one PID can be selected at a time.
PID # This is the numeric value for the PID, displayed in decimal and hexadecimal in brackets.
Enabled These check boxes authorize each individual PID for output. Overall, the NET Port(s) enabled
check box (see above) has to be turned on for these check boxes to have any effect.
Route to ASI This is a check box, which is used to enable each individual PID to output to the ASI. The NET
Port(s) enabled check box (see above) must be on for these check boxes to have any effect.
Description This is a text description of the PID, as entered when the PID was defined using the Add New
PID Definition or Edit Selected menu items.
Figure F- 2 Edit ASI Port
The following fields can be edited on the ASI Port Edit page:
Edit Field Description
ASI Port(s) Enabled This is a check box, which is used to enable or disable the ASI output.
Radio Buttons Clicking on a Radio button to select between PID mode and Transport Data Stream mode
output at the ASI. Selecting Transport Data mode will ensure a data stream at the interface
even if there is no PID enabled for output. PID mode allows the data from all enabled, routed to
the ASI, PIDs to be output in the data stream.
Route to ASI This check box allows you to choose to route the output of the selected PID to the ASI interface,
or not.