Operation Manual
SFX SERIES USER’S GUIDE 
Rev 2.2 21 
Web GUI Operation 
This chapter will provide detailed information on the meaning and operation of the various pages and menu options 
available on the Web GUI for the SFX family of receivers. 
Main Menu Page 
As stated in the previous chapter, once you have successfully logged in to the Web GUI you will be presented with the 
Main Menu page as shown in the example in Figure 2- 1. There are various areas of interest on this page, which will 
be described in this section. 
Logout Icon 
The “logout” icon is always present at all menu levels. By clicking on the icon you can quickly logout of the receiver 
Web GUI. To login again, follow the procedure outlined in Chapter 1. 
IDC Logo 
The IDC logo is always present at all menu levels. If your receiver is connected to a gateway to the Internet, then by 
clicking on the logo icon you can reach the International Datacasting website at
 www.Datacast.com. (This link is also 
available if you click in the area where the copyright notice appears in the center of the page– Figure 2- 1).
Receiver Identity 
The Receiver Identity is displayed only on the Main Menu page after you have successfully logged into the receiver 
Web GUI. It provides the name given to the receiver, the type of receiver (e.g. SFX3101) and the version of the main 
firmware application running in the unit. The name given to the receiver can be set using the Identity main menu tool 
bar item. 
Chapter 2 










