Operation Manual

SFX SERIES USER’S GUIDE
Rev 2.2 87
Channel Guide Configuration
This submenu allows you to configure where the channel guide information will come from, so the receiver can build an
internal list of channels for data, audio, and video services. This is only applicable if the channel guide feature is
supported by your Service Provider.
The following items are displayed on the Channel Guide Configuration page:
Display Item Description
State Decoding of the data channels is enabled/disabled.
Multicast Address The IP Address the receiver expects to see the electronic channel guide (ECG) information on.
Port The port number associated with this IP address.
Aside from the Common Menu Items, the following menu items are available:
Menu Item Description
Show Selecting this button will always return you back to the Channel Guide Configuration page.
Edit Selecting this button will enter the Edit Channel Guide Configuration page shown in Figure 2-
59. The fields shown have the same meaning as described in the Channel Configuration Page
above.
Figure 2- 59 Edit Channel Guide Configuration
DHCP Server
This submenu allows you to configure the DHCP Daemon within the receiver. This DHCP Daemon acts as a DHCP
Server. You must a thorough knowledge of the DHCP server function to use this submenu. The DHCP Configuration
page similar to Figure 2- 60 will be displayed when the submenu item is selected. Scroll to see the contents of the
bottom of the page.