Operation Manual

SFX SERIES USER’S GUIDE
Rev 2.2 94
Edit Field Description
Input Interface This field allows you to select the physical network interface that will be used to receive the
NCC stream.
Multicast Address Enter a multicast IP address that will contain the NCC channel packets. When using
NetManager2 via an Ethernet port, port 6000 is assumed, and your NetManager2 system must
be configured to output NCC packets at port 6000.
Password Manager
This submenu allows you to set the password for accounts managed by the receiver. The Password Edit page similar
to Figure 2- 69 will be displayed based on the User selected. The number of user passwords that can be set will vary
based on the number of accounts available in the receiver (see sections on logging in at the beginning of this chapter)
and options installed.
Figure 2- 69 Password Edit Page
To enter a new password for a selected user account, enter it twice under the two edit fields available on the page.
When completed, select Change Password to update the password immediately in the receiver.
SFX Home Page
This submenu allows you to set the default Web GUI page that will be displayed either on the Web browser on the
receiver’s local console (via localhost loopback), or on a remote node. This default home page is applicable to the port
80 interface only. Port 2100 on the receiver is always linked to the default Web GUI.
At the present time, the Web GUI Main Menu Page, (see Figure 1- 5) is the default home page.