User's Manual

23
RIOTRONIC X+
User Manual
The reel has an integrated bracket for the connector and offers a quick release system for
the RIOTRONIC X+ detonator. Use the wooden cylinder included with the reels for rapid
uncoiling.
Figure 18. Bracket system
3.2.6. Packaged Explosives
Proceed as follows:
 Take the RIOTRONIC X+ detonator out of the coil drawing out about one meter of
cable downline.
 If necessary, make a puncture in the cartridge using a non-ferrous spike.
 Push the RIOTRONIC X+ detonator into the cartridge so that the detonator stays
centered in the explosive.
 When lowering the base charge, secure the downline around the cartridge with a half
knot or plastic tape.
Figure 19. Priming with packaged explosives
3.2.7. Cast Booster
Proceed as follows:
 Take the RIOTRONIC X+ detonator out of the coil drawing out about one meter of
downline.
 Insert the RIOTRONIC X+ detonator into its internal hole and draw it out the other
side.
Bracket system