User's Manual

RIOTRONIC X+

User Manual

If there are not only OK detonators, there is warning. Detailed information can be checked

using up and down arrow keys and OK or F2 key. F1 key is to continue, then it must be

confirmed with F2 key.

If there are only OK detonator, F2 or OK key should be pressed.

Figure 51. Test blast

7.3. Blast procedure

At the beginning of blast procedure, type of control must be chosen. It could be:

 Local – blast will be initiated on the Blaster, where firing line is connected.

 Remote – blast will be initiated on Remote control device.

F1 or F2 key should be pressed.

Figure 52. Type of blast control

7.3.1. Local

If local blast control was chosen, user has to be authorised. RFID card have to be put on NFC

antenna.