User's Manual

60
RIOTRONIC X+
User Manual
In Step 2 mode should be set to DHCP or STATIC. In case of static, IP address, gateway and
mask must be set. Then Setting button should be pressed to confirm and Next_Step to go to
Step 3.
Figure 70. WiFi configuration - Step 2
In Step 3 all accessible networks are listed. Button Join button have to be pressed next to
preferred network name. User may be asked for password then. After confirming, modem is
restarted with new configuration. Web browser may be closed.
Figure 71. WiFi configuration - Step 3
7.6. Battery charging
Current battery level is displayed on top bar of display.
To charge the battery dedicated power supply has to be connected to CHARGE/LINK socket
at the Blaster’s front plate. Blaster automatically starts charging and suitable message will
be displayed.
There is no possibility to use Blaster while charging.
Figure 72. Battery charging screen
When charging is finished, user will be informed. Charger may be unplugged. Blaster will be
automatically turned off.