User's Manual

68
RIOTRONIC X+
User Manual
8.4. Pairing Blasters
To pair Blaster with Remote Blaster’s authentication card should be put to Remote’s NFC
antenna. Blaster will be added to the list and Remote will try to communicate with it using
medium chosen in Remote Type setting. When communication is established, blasting name
will be read and displayed on the list with connection status. Up to five Blasters can be added.
Figure 83. Remote waits for pairing Blasters
When all Blasters are added to the list, then OK or F2 key should be pressed to proceed.
Figure 84. Blaster properly paired
On the next screen also number of detonators for each Blaster is displayed. When all Blasters
are properly connected blast procedure can be started by pressing OK or F2 key.