Instructions / Assembly

Applicable bulb
type:A19,A60,T45,ST58...
(Excluding bulb)
1.Unpack all parts from cartons carefully.
2.Carefully pull-out excess power cord from
the lamp base while assembling to prevent
the cord from becoming twisted.
3.Tighten the lamp socket(A) into the MDF(B)
until tight.
4.Tighten the tube(C) into the MDF(B) until
tight.
5.Place the MDF(D) into the tube(C),then
tighten the tube(E) into the tube(C) until tight.
6.Place the MDF(F) into the tube(E),then
tighten the tubes(G) into the tube(E) until tight.
7.Place the harp(I) onto the saddle(H) of lamp
socket.
8.Place the shade(J)onto the harp(I),then
tighten the finial(K) into the harp(I)until tight.
9.Please use the attached balance kits to do
inclination adjustment if the lamp body
seemed to be slant after finished assemble.
C Tube 3
A Lamp socket 1
H Saddle 1
I Harp 1
J Shade 1
K Finial 1
B/D/F MDF 3
E Tube 3
G Tube 3