Datasheet

MaxBotix

Inc.

Patent 7,679,996

ParkSonar

-EZ Series

Page 13

Web: www.maxbotix.com

PD13426g

MaxBotix Inc., products are engineered and assembled in the USA.

After reviewing this datasheet, do you have any more questions?

We offer Technical Support on all of our products even if you purchased them through one of our many vendors

worldwide.

You can fill out a Technical Support form for assistance on a sensor here --> Technical Support

Not sure which sensor you need for your application?

We offer Sensor Selection Assistance, click the link here to fill out a form for support --> Sensor Selection Help

Looking for tutorials to help you get started?

Frequently Asked Questions about Our Sensors

We receive many questions about our products and services. This resource offers answers to common inquiries

we receive about our product lines and their application.

Fully Calibrated Beam Patterns

All of our sensors are factory calibrated to provide consistent beam patterns, detection zones, to fit into a wide

variety of applications. In our product lines, each model number comes with a different beam pattern that reflects

the sensitivity and the detection zone of how it sees a target. Additionally, we strive to maintain consistency be-

tween our finished products, and you will see little to no deviation between sensors of the same model. This al-

lows you to have confidence in your final application when using multiple sensors.

Understanding Range Readings

The success of an application may hinge upon knowing the exact location of a target. However, a sensor may

report one meter even if the target is not exactly one meter away from the sensor. Sensor specifications, such as

resolution, precision, and accuracy, help you to understand sensor performance.

How to Use Multiple Ultrasonic Sensors

This guide covers three ways to run your sensors in a Multiple Sensor environment and issues you may face.

Please call during our preferred business hours of 8:00 am – 4:30 pm EST on Monday through Thursday and 8:00 am –

2:00 pm EST on Friday, or you may leave us a voicemail anytime.