Product guide

72 Configuration Software and Utilities
73MAXDATA PLATINUM 90002R Server System
Figure 33. Edit User Configuration
After editing the user information, click OK to return to the User Conguration screen.
Enable User
This check box is used to enable you to attempt to have access to the available channels. Leaving the
box unchecked disables the user, preventing that user from accessing the channels.
Enter Username
This edit box is used to enter an out-of-band username. If the anonymous user is selected for
modication, the screen displayed does not include this edit box because the user name cannot be
changed.
The password can be from 1 to 16 ASCII characters long. The characters accepted by the SMU for
usernames are the ASCII printable characters in the range 0x21 through 0x7e, except for left and
right bracket characters (‘[‘ and ‘]’). These characters are reserved for framing packets for terminal
mode sessions.
Clear Password
This check box is used to clear the password for the user. If this box is checked, the Enter and Verify
New Password edit boxes are disabled.
Enter/Verify New Password
These edit boxes allow you to enter the password for the user. The Verify New Password edit box
ensures that the password entered in the Enter New Password edit box is correct. As a user enters
a password, asterisks are displayed. If a password already exists, these elds show ******** when
you enter this screen.
This password can be between 1 and 16 ASCII characters in length. The characters accepted by the
SMU for user passwords are the ASCII printable characters in the range 0x21 through 0x7e, except
for left and right bracket characters ( [ and ]), since those characters are used for framing packets for
terminal mode sessions.