Digital Photo Frame USER MANUAL MultiMediaCard JPEG PLAYER
Table of contents Precautions and maintenance Cleaning the LCD Screen Important Safety Precautions Remote Controller Function Buttons Installing and replacing the Remote Control Battery Player Overview Play Photo File Play Video File Play Music File Play Photo+Music File Setup Calender Troubleshooting Guide Specifications 2 2 3 4 5 6 7 7 8 8 9 10 11 12 1
Introduction Precautions and Maintenance For indoor use only. To avoid risk of fire or electric shock, do not expose this appliance to moisture. To avoid overheating, do not block the ventilation holes on the back of this digital photo frame at any time. Keep this Multimedia Digital Photo Frame out of sunlight. Direct sunlight may cause damage. Do not dismantle the Multimedia Digital Photo Frame. There is a risk of electric shock, and there are no user serviceable parts inside.
Important Safety Precautions Read these instructions. Heed all warnings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
Remote Controller Function Buttons 1. UP BUTTON( ): Up cursor selection. 1 2. SETUP BUTTON: Used to enter the photo frame setup options. 2 14 3 3. ENTER BUTTON: Used to confirm options. 4. LEFT SHIFT BUTTON( 5. EXIT BUTTON: Press EXIT key to return into last interface. 6. DOWN BUTTON( 13 4 ): Left cursor selection 5 6 7 12 8 10 11 ): Down cursor selection. 7. VOL- BUTTON: Used to adjust the volume. 8. ZOOM BUTTON: Used to zoom into the image. Used to select multiple files in photo menu. 9.
Installing and replacing the Remote Control Battery 1. Remote control face down, pop out the battery tray. 2. Insert the batteries. CR2025 Insert the batteries according to the correct (+)(-) polarity. 3. Close the 1. Do not leave dead batteries in the remote control. 2. If you do not use the remote control for a long period of time, remove the battery. Note: 1. Point the remote control directly at the digital frame remote sensor. 2. Do not leave the remote control in an extremely hot or humid place. 3.
Player Overview Key control and Key functions: 1 2 3 4 5 6 7 5. UP BUTTON( ): Functional selection button and rotate 90 degrees counter-clockwise. 8 9 6. DOWN BUTTON( ): Functional selection button and rotate 90 degrees clockwise. 10 7. STANDBY BUTTON: Used to power on and off the Digital Photo Frame. 11 8. DC 5V:Input for the DC Power Adapter into the DPF. 9. ON/OFF: Used to power on and off the Digital Photo Frame. 12 1. ENTER BUTTON: Used to confirm options. and Pause or Play. 10.
Play Photo File Play Video File Turn on the DPF, insert memory card or USB, press menu button two times then back to select mode (Fig 3). Power on, if the digital frame is not inserted with memory cards there will be no pictures, video or music , DPF screen will display as (Fig 1). Pictures will be played automatically when you plug the memory cards or the USB Drive. Press MENU key to return to Photo menu ( Fig 2 ) . Enter picture playing mode by selecting Photo in the Select Mode (Fig 3).
Play music File Play Photo+Music File Music will be played automatically when you plug the memory cards or the USB Drive. Press MENU key to return to Select Mode. Pictures and music will be combo played automatically when you plug the memory cards or the USB Drive. Press MENU key to return to Photo menu. Enter the music playing mode by selecting Music in the Select Mode (Fig 4). Enter the pictures and music combo playing mode by selecting Slideshow in the Select Mode (Fig 5).
Setup Operation: In any menu, press SETUP key to go into the SETUP interface (Fig 6). Press key to choose the selection item. Use the ENTER button to change the setting. Image Size Slide Show Effect Slide Show Interval Split Slide Show Music Play Mode Music AS Alarm Start Slide Show Calendar Rotate Fig 6 1. Image Size Allows how the images are displayed on the photo frame. Choose between: Auto Fit, Optimal or Full. 2. Slide Show Effect Set different effects to the image slideshow.
Setup Calendar 12. Format Memory To format the built-in flash 13. Reset Setting To restore default settings. Calendar 14. Language Choose between different languages. 15. Brightness To change the brightness of the LCD screen. 16. Contrast To change the contrast of the LCD screen. 17. Color To change the color of the LCD screen. Fig 7 Allow user to setup date and time of the system (Fig 7). 18. Tint To change the tint of the LCD screen.
Troubleshooting Guide If you are experiencing problems with your DPF, please consult both this manual. If you need further assistance, please contact customerservices@maxell.eu No power: Please check that the DC power cord is plugged in correctly. Can not play the file: Please confirm whether the file format is supported by the player Display too bright or too dark: Please adjust the brightness or contrast in the setup menu. The color is light or no color: Please adjust the color setup.
Specifications Display: 10.
