Installation Instructions

ManualsBrandsMaxEnergy ManualsAntennasMini Indoor HDTV Antenna

MAXS01 301-0030

Ultra-Thin Indoor HDTV Antenna

User's Guide

Congratulations on your purchase of the MaxEnergy MAXS01 301-0030 Ultra-Thin Indoor HDTV Antenna. This antenna’s paper-thin design lets you hang it virtually anywhere on

walls or windows. Its 10-foot cable gives you room to roam to find the best spot for optimum reception, with a multi-directional reception pattern that gets signals from every

direction. This antenna will work best within 25miles of the DTV tower.

Setting Up the MAXS01 301-0030, Find the best location for the antenna

Before you connect the antenna, determine the best spot in your home for optimum reception. Visit Menards.com keyword “antennas” to view the local stations available in your

area. Then, try as much as possible to avoid obstructions between these transmitters and your antenna. It is highly recommended that the flat surface of the antenna should face

the broadcast tower or as close as practical. Because of its multi-directional capabilities, the MAXS01 301-0030 receives UHF, and local high-definition broadcasts, providing quality

reception from most locations. Note: Placing the antenna on a metal surface may interfere with reception. If the antenna isn’t performing as well as expected, try placing it on

another surface. Then, re-scan for channels on your TV or converter box.

Test the Location

Broadcast signal strength can vary significantly inside your home even within the same room. In most homes, the best signal strength will usually be in a window or as high on the

wall as possible. Once you’ve scanned for channels on your TV, you’ll be able to tell if this is a good location to use or not. If it is, you can continue with the mounting instructions

that follow. If it isn’t, you can try for better channel scan results with the antenna in a different location in the room.

Mounting the Antenna to the Wall

Once you’ve confirmed the best location for your antenna and scanned for channels, you’re ready to mount the antenna to that location, using the mounting foam included.

Summary of content (2 pages)

PAGE 1
MAXS01 301-0030 Ultra-Thin Indoor HDTV Antenna User's Guide Congratulations on your purchase of the MaxEnergy MAXS01 301-0030 Ultra-Thin Indoor HDTV Antenna. This antenna’s paper-thin design lets you hang it virtually anywhere on walls or windows. Its 10-foot cable gives you room to roam to find the best spot for optimum reception, with a multi-directional reception pattern that gets signals from every direction. This antenna will work best within 25miles of the DTV tower.
PAGE 2
Connect the MAXS01 301-0030's built-in cable to the antenna input on your TV. Important: Make sure you uncoil the antenna’s coaxial cable completely. Leaving it coiled will reduce reception performance. In the TV’s setup menu, set the tuner mode to “Antenna” or “Air”. Refer to the TV manual for detailed instructions. In the TV’s setup menu, set TV to “scan” for channels. This can sometimes be listed as auto-program, auto-scan, channel search or channel scan.