User's Manual

MAXFOR Technology Inc.
MQEP-22-04 ( 10 / 10
) R.0
㈜ 맥 스 포
A4(210×297mm)
MAXFOR Technology
48, Banjeong-ro, Yangji-myeon, Cheoin-gu,
Yongin-si, Gyeonggi-do, Korea
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
FCC Part 15.21 statement
Any changes or modifications to this device not explicitly approved by manufacturer could void your
authority to operate this equipment.
FCC Part 15.19 statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Body-worn Operation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum 20 cm between the radiator and your
body. This transmitter must not be collocated or operating in conjunction with any other antenna or
transmitter unless authorized to do so by the FCC.