User Manual

Changing Buckle Position
for Smaller Infants
14
13
WARNING: Failure to place buckle’s metal retainer
completely through pad and shell can result in serious
injury or death.
With Buckle in the 1st Slot As
Shown, Pull Up Front of Seat
Pad
If you need to move the buckle to
the 1st slot, see pages 11-13.
From Bottom of Seat,
Pull Metal Retainer Towards
You and Push It Up into the
Middle Slot As Shown
Pull Buckle’s Metal Retainer
Completely Through Pad and
Shell
If you cannot achieve a snug harness fi t for your infant,
make these adjustments.
If you cannot achieve a snug harness fi t for your infant, see
page 14.
To learn how to check harness tightness, see pages 53-55.
WARNING: Failure to place buckle’s metal retainer
completely through pad and shell can result in serious
injury or death.
Check Buckle
Pull up on buckle to make sure it is
secured.
The buckle must not pull out.
9
10
1
2
3
4
From Top of Seat,
Lay the Metal Retainer Flat
Against the Shell As Shown
Tuck Car Seat Pad Back
Around Front of Car Seat
and Check Buckle
Pull up on buckle to make sure it
is secured.
The buckle must not pull out.
Insert Buckle’s Metal Retainer
into Same Slot as Buckle Cover
Buckle must face out.
1
2
3
8