User Manual

Changing Torso Position
16
Reclining the Car Seat
15
This car seat has multiple positions. This car seat has an adjustable torso.
To Recline: Place one hand on the back of the car seat. With your
other hand, squeeze the recline handle. The car seat will rotate in the
base. Release the recline handle to lock the seat into place.
For More Upright: Place one hand on the back of the car seat.
With your other hand, squeeze the recline handle and pull top of car
seat forward. Release the recline handle to lock the seat into place.
To Change Positions:
Push in on torso adjustment buttons on both sides of the car seat
while sliding the adjustable torso up or down.
Release the buttons to lock the torso in place. Hold the sides of the
torso and move it up and down to make sure it is securely locked
in place.
Forward-Facing
Mode
Forward-Facing
Mode
Rear-Facing
Mode
Rear-Facing
Mode
Booster Seat
Mode
Booster Seat
Mode
Use any blue
position that will
put the Rear-Facing
Angle Indicator ball
in the blue zone.
Position 1
Use either red
position that will make
the back of the car
seat as fl ush against
the vehicle seat back
as possible
.
Position 1
or Position 2
You may adjust to
Position 2 as your
child grows.
On the base, there are labels that call out
the recline positions you will need to use
to install this car seat in different modes.
Use the fully upright
purple position.
Position 3