User Manual

continued on next page
2827
3
4
5
Recline the Car Seat
Squeeze the recline handle
and rotate the car seat to any
blue position
that will put
the angle indicator ball in the
blue zone
.
Locate Rear-Facing
Belt Path
Pull the car seat pad off the
front of the car seat to reveal
the Rear-Facing Belt Path.
It may be easier to lift up
the pad if you remove the
cupholders. See page 4.
You will see the lower
anchor/UAS belt when you
pull back the pad.
Do not remove this belt
from its storage location.
The vehicle belt will be
routed over top of it.
Route the Vehicle Belt
Thread the vehicle belt
into the Rear-Facing
Belt Path opening.
Pull it across the seat, in front
of the buckle, and over top of
the lower anchor/UAS belt.
Then thread it through
the other belt path
opening as shown.
Do not twist belt.
IMPORTANT!
If you will be using the
AutoLock:
Do not pull the vehicle belt
all the way out to lock it
BEFORE routing the belt.
This will make threading the
shoulder belt into the AutoLock
easier.
If you will not be using the
AutoLock:
Review pages 19-22 and your
vehicle owner’s manual to
determine what kind of vehicle
belt you have and how to lock
a child restraint in place.
Lower
Anchor/
UAS Belt
Rear-Facing
AutoLock
Rear-Facing Angle Indicator
Rear-Facing Positions