User Manual

3837
10
13
Recheck Rear-Facing
Recline Angle Indicator
Make sure the angle
indicator ball is in the
blue zone.
Redo the installation if not
reclined correctly.
Check Belt Tightness
Hold child restraint at the belt
path with your weaker hand.
Push and pull from side to
side.
It should not move more than
2.5 cm (1 in.).
NOTE: You may need to place
a tightly rolled towel(s) or foam
pool noodle(s) under the front
of the base to help achieve the
correct recline.
Check often to be sure
padding is still in place and the
belt is tight.
Replace the Car Seat
Pad Around the Front
of the Car Seat
Pull harness adjustment strap
through slot in pad as shown.
Replace cupholders if they
have been removed.
11
Finished!
Check the tightness of the install
often to make sure it has not
loosened.
Secure Child in Car Seat
To properly secure your child in
the car seat, see pages 53-55.
Check your child’s fi t often
and make any needed adjust-
ments to the car seat as they
grow.
If it moves more than 2.5 cm (1 in.), you can try:
A. Pulling the belt tighter.
B. Reinstalling the child restraint.
C. Changing to a different seating location.
D. Switching to vehicle belt installation.
12