User Manual

continued on next page
48
47
Do not use the lower/UAS anchors of the child restraint
anchorage system (LATCH system/UAS) to attach this child
restraint when restraining a child weighing more than 18 kg
(40 lbs).
Before you begin installing the seat
into your vehicle, did you check:
Your child’s weight and height?
10-18 kg (22-40 lb) and
74-125 cm (29-49 in.)
Your child’s fi t? See page 9.
Do you need to make adjustments to the
harness/headrest height or the buckle position?
1
2
3
Raise the Headrest All the
Way Up
Undo All of the Headrest
Pad Fasteners
Lift Up the Headrest Pad to
Reveal the Forward-Facing
Belt Path
IMPORTANT!
Do not use the AutoLock
feature when installing with
lower anchor/UAS belts.
Forward-Facing
AutoLock
Torso Position 1
or 2 Can Be Used
You may adjust to
Position 2 as your
child grows.
4
From the Back of the Seat,
Flip the Seat Pad Forward to
Reveal Lower Anchor/UAS Belt
Remove belt and connectors from the
storage location or if belt was used
rear-facing, remove from the Rear-
Facing Belt Path.
Forward-Facing LATCH: Lower
Anchor/UAS + Tether Install