Operation Manual

14
For sedans only
Drill a 9 mm diameter hole in the parcel shelf on the centre-line of the seating
position as shown in Figure 2. Install the anchor bolt as shown in Figure 3. It is
recommendedthatthisinstallationbecarriedoutbyachildrestraintttingstation
or licenced motor mechanic.
For vehicles other than sedans
InAustralia,consultyournearestchildrestraintttingstationortrafcauthorityfor
vehicleinspectiontondthebest,correctpositionfortheplacementoftheupper
anchorage point, and for the correct attachment bolt length and use of spacers. In
New Zealand, consult the agent for the vehicle.
WARNING: CHILD RESTRAINTS MUST NOT BE ATTACHED TO UNSOUND
METAL OR TO WOOD, OR SYNTHETIC STRUCTURES. WHEN DRILLING THE
9 mm HOLE DO NOT DRILL THROUGH FUEL LINES, FUEL TANKS, ELECTRICAL
WIRING, OR RADIO SPEAKERS. WEBBING STRAPS MUST BE PROTECTED
FROM SHARP CORNERS AND EDGES.
THE ANCHOR FITTING MUST BE USED ONLY AS DESCRIBED ABOVE. IT MUST
NOT BE HOOKED ONTO ANY OTHER OBJECT.
Vehicle information
Upper anchorage tting installation