Operation Manual

28
Installation
Lap sash / lap only base installation
• Install base facing backwards, with the
stabilising bar against the back of the car
seat.
• Determine if base adjustment is required
(refer to steps on pages 19 - 20)
• Thread the vehicle lap or lap/shoulder belt
combination through belt path as shown.
• Thread the vehicle lap or lap/shoulder belt
combination through belt path as shown.
• Bucklevehiclebelt.Pushdownrmlyonthe
base and pull up on the belt to tighten. Pull
up on shoulder strap to remove any slack.
REARWARD FACING BELT PATH
REARWARD
-FACING
BELT PATH