User’s Manual MP-2220 English www.maxian.
Security Instructions For your security and to prevent any damages, please read the following safety instructions carefully. Please read the following safety instructions carefully. Power Related Do not plug in multiple power adapters simultaneously. This may cause fire. Don’t bend the power adapter excessively, and keep it from being pressed against anything heavy or being damaged. This may cause fire Do not touch the power adapter with wet hands. This may cause electric shock.
PORTABLE MEDIA PLAYER Disconnect the power cord in case of lightning. This may cause electric shock. If any liquid or alien substance is spilt or dropped onto the product, turn it off and stop the power supply. This may cause fire or electric shock. Avoid letting any liquids, chemicals, cosmetics, etc. come into contact with the product. This may cause damage to the product. Under no circumstances turn the product on and immediately contact a Service Center.
Safety Instructions Safety Instructions for Using the DC Converter Never open the case! There is a danger of electronic shock. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Touching parts of the DC converter may cause electric shock. Do not open the charger case for your own safety. To prevent operating problems when using the DC converter, please read the User Manual. Caution Avoid any contact with water or other liquids.
PORTABLE MEDIA PLAYER About the Internal Rechargeable Battery ● Do not use a damaged internal rechargeable battery or charger. ● Do not charge the rechargeable battery for longer than the specified time. ● Charge the battery fully when using the battery for the first time or when using the battery after a few months of non-use. ● Charge the battery fully, use it until it is completely discharged, and recharge it again to ensure a long lifetime.
Contents Preparations Safety Instructions ...............................................................................................2 Packages.............................................................................................................8 Part Names .........................................................................................................9 Connection Connecting the Power (Charging) ......................................................................
PORTABLE MEDIA PLAYER Additional Usage Viewing File Information (VIDEO / MUSIC / VOICE / PHOTO / FILES) .....................31 Sorting Files (VIDEO / MUSIC / VOICE / PHOTO) ............................................32 Configuring the Playlist (MUSIC)........................................................................33 Using the Playlist (MUSIC / VOICE)...................................................................34 Configuring Play Mode .............................
Packages PMP(Portable Media Player) Main Body Earphones USB 1.1 Cable Power Adapter ☞ Note User Manual AV Cable Remote Control Line In Cable Installation CD Portable Bag USB 2.0 Cable ● The contents are subject to change for the purpose of improving the performance without prior notice. ● Dispose of the packages and the old appliance separately for recycling. ● The supplied Line In cable can only be used to connect an external audio device for audio recording.
Part Names Main Body Hold Switch Earphone / Remote Control Jack HOLD Power On, Off / Menu Button Repeat Button Record Button Microphone Display Volume / Move File Stop/ Move To Previous Menu Play / Pause Button Move Menu / High Speed Search / Changing the Directory HOLD Reset Hole Audio Out Jack Line In Jack / Audio In Jack USB 2.0 Port USB 1.1 Host Port Remote Control Charger Jack ☞ Note ● To reset the unit, press the reset button with a pin through the Reset Hole.
Part Names Operating Display Battery Charge MUSIC ► Music Mode Title (Name of the song and the artist) 001. Title song.mp3 - Park.HB Volume Sound Output Bit Rate Play Mode / Status Lyrics Display 128Kbps 44.1KHz Rock Shuffle A-B 0:00:15 3:20:30 Oh, when I hold you tight Progress Time Sampling Rate Play Method Total Play Time Repeat Mode EQ Shuffle Battery Charge Radio Mode Volume 84.
Connecting the Power (Charging) Before using the product, charge the battery by connecting the DC adapter supplied. 1 2 Connect the DC adapter to the DC 5V jack of the product. Firmly plug the DC adapter into the power outlet. While charging the battery, the Charge Status light turns red. When the battery is fully charged, the red light of the Charge Status light changes. ● Before using the unit, charge the battery for about 4 hours so that it is completely charged.
Connecting External Equipment (AV OUT Jack) You can view videos and pictures saved in the unit through a TV or PC monitor by connecting the AV OUT jack of the product. Watching a video/music/voice file Viewing a photo file Red White Yellow Yellow Viewing Video/Music/Voice through the TV 1. Connect the AV cable plug to the AV OUT jack of the unit and the three RCA plugs to the External TV In jacks. (Yellow: Video, White: Audio (Left), Red: Audio (Right)) 2.
Connecting to a PC Connecting to a PC using the USB cable 1 Connect the DC adapter to the main body and switch it on. ● Since operating the unit in connection with a PC consumes more power than during normal operation and insufficient unit power may cause data loss, you need to connect the unit to the DC adapter. 2 Open the bottom cover of the main body and connect the USB 2.0 Port on the unit and the USB port of the computer using the USB 2.0 cable.
Installing the USB Driver Manually If the USB driver has been properly installed, skip this section and go to “Downloading and Uploading a File”on page 16. Follow the procedures below only when the USB driver is not installed automatically. When an Error Occurs while installing the USB Driver 1 Check the Device Manager.
PORTABLE MEDIA PLAYER For Windows 98SE Separate the USB cable connecting the Windows™ 98SE PC and the unit and complete the following procedures. Install the driver as follows and restart the computer. Then you can move files between the computer and the unit using Windows® Explorer. ● Insert the supplied Installation CD-ROM into the CD-ROM drive. ● Open the Installation CD and double-click the USB Driver folder to open it. Double-click Setup.exe 2 Follow the instructions on the windows.
Using the Removable Disk Downloading and Uploading a File 1 2 3 Turn the unit on and connect the unit to the computer. Launch Windows Explorer on the computer. ● The unit is represented as a Removable Disk in Windows Explorer. Select a folder on the removable disk to save the files and drag and drop the files to this location. The saved files are played in the filename order. To change the order, rename the files. ● If you rename the files to 001***, 002***...
PORTABLE MEDIA PLAYER Disconnecting the USB Cable When you finish transmitting the files, unplug the cable according to the procedures below. Double-click the green arrow in the notification area. Select the USB device and press the [Stop] button. When the Stop Hardware Device screen appears, click the [OK] button and remove the USB cable. 1 2 ☞ Notice ● Separating the cable while downloading or uploading files may cause data loss.
Before Installing the Software For the proper operation of the video playback function, converting file formats using the supplied Transcoder is recommended. Files using formats not supported by this product will not play unless they are converted using the Transcoder. You may experience unstable video playback even when playing files of a supported format. In this case, it is recommended converting the file using the supplied Transcoder.
Installing the Codec ● Insert the supplied Installation CD-ROM into the CD-ROM drive. ● Open the Installation CD and double-click the Codecs folder. To use the Transcoder, the following DivX codec, MP3 codec, and AC3 codec program must be properly installed. Install the programs according to the instructions using the supplied CD-ROM. To Install the DivX Codec 1 2 Double-click the 3 Follow the instructions in the windows. from among the 3 setup files within the Codecs folder.
Installing the Codec To Install the AC3 Codec 1 2 Double-click the from among the 3 setup files within the Codecs folder. Select [Yes] to complete the installation. When you complete the installation, restart the computer. To Install the MP3 Codec 1 2 Double-click the from among the 3 setup files within the Codecs folder. Select [Yes] to complete the installation. When you complete the installation, restart the computer.
Installing the DirectX9 ● Insert the supplied Installation CD-ROM into the CD-ROM drive. ● Open the Installation CD and double-click the DirectX9 folder. To Install DirectX9 Double-click dxsetup.exe to launch it. 2 Follow the instructions in the windows to complete the installation. 1 When you complete the installation, restart the computer. To Check the Installed Codecs 1 Select Device Manager and double-click on Audio Codecs.
Installing the Transcoder To install the software Requirements The software requires the following computer system requirements. ● Pentium 3 500MHz or faster ● Windows 98SE/ME/2000/XP ● 50MB of free hard disk drive space ● USB (2.0) Support ● CD-ROM Drive (2x or faster) ● 128MB of memory or larger (256MB or larger is recommended) ● DirectX 9.
Using the Transcoder To Convert to a File Double-click the Maxian Transcoder icon on the Desktop. Click the [Source] button. Select a video file to convert and click the [Open] button. 1 2 3 Configure the options and click the [Start] button. The location of the original file. You can change the file to be created and the location to save the file to.
Playing a File To Play a File (Turning the Power on) Press and hold the MENU button on the main body when it is turned off. The main menu screen will appear. ● Select a menu using the on the unit or the remote control and press the button to enter the menu. ● Select the file to play using the + / – buttons on the unit and press the button to play the file. : Moves to the high-level folder or cancels a folder. / : Move to a sub folder, Enters the folder + / – : Moves the folder or file in a directory.
PORTABLE MEDIA PLAYER To Adjust the Volume You can adjust the volume by using the + / – buttons on the unit or the remote control during playback. ● You can select a volume level between 00 and 99. ● Pressing once briefly, adjusts a single volume level. Press and hold the button to accelerate the volume adjustment speed. [MBC] Documentery1.avi 0:00:20 4:20:30 Hold Function If you set the Hold function, pressing buttons during playback will not work.
Recording Voice Since pressing the RECORD button during MUSIC/VIDEO/RADIO/PHOTO playback does not start recording, press the button to move to the previous menu and to the main menu. 1 2 Press the RECORD button on the left side of the unit. 3 To stop recording, press the button while recording voice. Select VOICE Recording using the + / – buttons and press the ● Press the Press the button to pause recording. button once again to resume recording. button to start voice recording.
Recording Music Since pressing the RECORD button during MUSIC/VIDEO/RADIO/PHOTO playback does not start recording, press the button to move to the previous menu and to the main menu. 1 Connect the Line Out jack of the external audio equipment and the AV IN jack of the unit with the Line In cable. 2 3 Press the RECORD button on the left side of the unit. 4 Select AUDIO Recording using the + / – buttons and press the ● Press the Press the button to pause recording.
Encoding a Video Since pressing the RECORD button during MUSIC/VIDEO/RADIO/PHOTO playback does not start recording, press the button to move to the previous menu and to the main menu. 1 Connect the out ports (3 RCA ports) of external video equipment and the AV IN jack of the unit with the AV cable. (Yellow: Video, White: Audio (Left), Red: Audio (Right)) Red White Yellow 2 3 4 Press the RECORD button on the left side of the unit.
Searching To Search for a Part during Playback (VIDEO/MUSIC/VOICE) ● To search for a part, press and hold the buttons during playback. ● If you stop pressing the button, the file is played in normal speed. ● Pressing the button briefly during video playback, starts a high speed search. At the desired point, press the or buttons to play the file from that point.
Configuring Repetition (MUSIC / VOICE) You can only configure this in the MUSIC menu. 1 From the point where repetition is started, press the A ► B button while playing the file. ● A is displayed on the Operating Display. MUSIC ► 001. Lovesong.mp3 - Park.HB 128Kbps 44.1KHz Rock Shuffle A 0:00:15 2 3:20:30 At the point where repetition is stopped, press the A ► B button again. ● A – B is displayed on the Operating Display. ● The configured section is repeated continuously. MUSIC ► 001. Lovesong.
Viewing File Information (VIDEO / MUSIC / VOICE / PHOTO / FILES) You can only configure this in the VIDEO/MUSIC/PHOTO/FILES menu. 1 2 3 4 Select a menu from the main menu using the ● The file list of the selected menu will be displayed. buttons and press the button. Select a file to view information for using the + / – buttons. Press the MENU button. ● The sub-menu will be displayed. Select Information using the + / – buttons and press the ● The information will be displayed for about 3 seconds.
Sorting Files (VIDEO / MUSIC / VOICE / PHOTO) You can sort files in the VIDEO/MUSIC/PHOTO menu. You can sort the file list by the name or the date registered. 1 2 3 4 5 Select a menu from the main menu using the ● The file list of the selected menu will be displayed. buttons and then press the button. Select a file using the + / – buttons. Press the MENU button. ● The sub-menu will be displayed. Select Sort using the + / – buttons and then press the ● The sub-menu of the Sort menu will be displayed.
Configuring the Playlist (MUSIC) You can only configure this from the MUSIC menu. To Add to the Playlist 1 2 3 4 5 Select MUSIC from the main menu using the buttons and then press the ● The MUSIC file list will be displayed. button. Select a file using the + / – buttons. Press the MENU button. ● The sub-menu will be displayed. Select the Add to Playlist using the + / – buttons and then press the button. When registration is complete, the “Added in playlist” message will be displayed.
Using the Playlist (MUSIC / VOICE) To Play the Playlist 1 Select the Playlist using the + / – buttons and then press the ● The configured Playlist will be displayed. button. 2 3 Select a file to play using the + / – buttons and then press the ● The selected file is played. button. Pressing the button to stop playing the file and display the file list of the previous menu. : Moves to the high-level folder or cancels a folder.
Using the Playlist (MUSIC / VOICE) The Playlist provides the following functions. To Delete a File from the Playlist ● Select a file from the Playlist and then press the MENU button. - The sub-menu will be displayed. ● Select Delete from the Playlist using the + / – buttons and then press the button. PlayList files 1. Loving Day. mp3 from Playlist Delete 2. Title song. mp3 Clear Playlist 3. My heart. mp3 File information - The selected Playlist is deleted.
Configuring Play Mode (VIDEO / MUSIC / VOICE) Configuring Repeat in the MUSIC Menu 1 Select MUSIC from the main menu using the buttons and then press the ● The MUSIC file list will be displayed. 2 Select a file using the + / – buttons and then press the MENU button. 3 Select Repeat using the + / – buttons and then press the button. ● The sub menu will be displayed. button. ● When files within the folder are selected by All: All files within the folder are played repeatedly.
PORTABLE MEDIA PLAYER Configuring Repeat in the VIDEO Menu 1 Select VIDEO from the main menu using the 2 Select a file using the + / – buttons and then press the MENU button. 3 Select Repeat using the + / – buttons and then press the ● The VIDEO file list will be displayed. buttons and then press the button. ● The sub menu will be displayed. ● The Repeat ON message will be displayed. button. ● To cancel, select Repeat again, and press the The Repeat OFF message will appear and Repeat is canceled.
Configuring Play Mode (MUSIC / VOICE) Shuffle Play 1 Select MUSIC from the main menu using the buttons and then press the ● The MUSIC file list will be displayed. 2 Select a file using the + / – buttons and then press the MENU button. 3 4 Select Shuffle using the + / – buttons and then press the button. ● The sub menu will be displayed. Select Shuffle On using the + / – buttons and then press the ● To cancel, select Shuffle Off. MUSIC ► MUSIC ► Playlist Information RECORD Sort 1. Loving Day.
PORTABLE MEDIA PLAYER Configuring EQ You can configure the EQ to select various sound effects. 1 Select MUSIC from the main menu using the buttons and then press the ● The MUSIC file list will be displayed. 2 Select a file using the + / – buttons and then press the MENU button. 3 4 Select Equalizer using the + / – buttons and then press the button. ● The sub menu will be displayed. Select EQ using the + / – buttons and then press the ● You can select a sound effect.
Configuring Play Mode (VIDEO / MUSIC / VOICE) Configuring the Bookmarks While Playing a File If you set a Bookmark, the file is played from the point when you play the file. 1 2 Press the RECORD button while playing a video, music or voice file. ● The Bookmark SET message will be displayed on the screen. ● The Bookmarked files are marked by the icon in the file list. To cancel a Bookmark, play the Bookmarked file from the file list. MOVIE ► Bookmark SET [MBC] Documentery1.avi 0:00:20 4:20:30 1.
Managing Files You can easily copy files saved on most USB devices (digital cameras, MP3 players, etc.) that support UMS (USB Mass Storage) using a USB host cable. Using the USB Host Function 1 Connect the USB 1.1 cable to the port at the bottom of the unit and connect the external USB item with the USB 2.0 cable. 2 3 Select FILES from the main menu by using the buttons and press the Select USB using the + / – buttons and then press the button. 4 5 6 button.
Managing Files Moving a File 1 2 3 4 5 Select FILES from the main menu using the buttons and press the Select a HDD using the + / – buttons and press the button. ● The data saved on the hard disk will be displayed. button. Select a file or folder using the + / – buttons and press the MENU button. Select Move using the + / – buttons and press the The color of the selected file or folder turns red. button. ● The red color represents the selected target file or folder.
P ) 파일관리하기 ( 비디오 / 음악 / 음성 / 포토 ORTABLE MEDIA PLAYER Copying a File to an External USB Device 1 2 3 4 5 6 Connect the USB 1.1 cable to the port at the bottom of the unit and connect the external USB item with the USB 2.0 cable. (For procedures to connect, refer to page 41.) Select FILES from the main menu using the buttons and press the Select a HDD using the + / – buttons and press the button. ● The data saved on the hard disk will be displayed. button.
Managing Files (VIDEO / MUSIC / PHOTO / FILES) You can only configure this from the VIDEO, MUSIC, PHOTO, FILES menu. Deleting a File 1 Select a menu from the main menu using the 2 3 Select a file or folder to delete using the + / – buttons. 4 Select Delete using the + / – buttons and press the 5 buttons and then press the ● The file list of the selected menu will be displayed. ● If you have selected FILES, select HDD using the + / – buttons and press the button. button. Press the MENU button.
Configuring a Photo File Configuring SlideShow You can view a number of photo files using SlideShow. 1 Select PHOTO from the main menu using the 2 Select files using the + / – buttons and press the MENU button. 3 Select SlideShow using the + / – buttons and press the ● The selected files are displayed through SlideShow. ● To cancel the SlideShow, press the button. ● The file list of the PHOTO menu will be displayed. buttons and press the button. ● The sub-menu will be displayed. PHOTO► 1. Flower-1.
Configuring a Photo File Configuring the SlideShow interval 1 2 3 4 Select PHOTO from the main menu using the ● The file list of the PHOTO menu will be displayed. buttons and press the button. Select files using the + / – buttons and press the MENU button. ● The sub-menu will be displayed. Select Show Interval using the + / – buttons and press the button. Configure the Time Setting using the + / - buttons and then press the button.
PORTABLE MEDIA PLAYER Zooming-in on a Photo File while Playing the File 1 Select PHOTO from the main menu using the ● The file list of the PHOTO menu will be displayed. buttons and press the 2 Select a file to zoom-in on using the + / – buttons and press the 3 Press the MENU button and select a zoom level using the + / – buttons. 4 Whenever you press the respectively. ● The file will be played. button. ● Alternatively, you can directly switch to Zoom mode by pressing the button.
Listening to FM Radio Select RADIO from the main menu using the The unit will be in Radio mode. buttons and press the button. Since the earphones act as the antenna, connect the earphones before using. To Manually Find a Channel Press the button briefly in Preset OFF status to manually find the frequency of a channel. Pressing the button for the Radio turns Preset Mode on or off as well as turning the green light of the Preset icon on or off on the screen.
PORTABLE MEDIA PLAYER Saving a Channel Automatically Press the MENU button. ● The menu screen will be displayed. Auto-Scan Add to preset Remove from preset Select Auto-Scan using the + / – buttons and press the button. 84.5 This automatically searches the band between 87.5MHz and 108.0MHz line and saves the found channels. 1 2 3 ● If you use the Auto–Scan function, the found channels are saved from the preset number or 1. ● The found channels are saved in the preset num bers 1 to 30. 84.5 1 84.
Configuring the Menu Press the MENU button from the main menu. The menu screen will be displayed. Select a menu using the + / – buttons and press the button. Press the button to return to the previous menu. ● Display: To configure the LCD screen display. ● Record: To configure the detailed recording function. ● System: To view or configure the system specifications.
Configuring Recording Mode Voice recording ● Select Voice recording using the + / – buttons, select Quality and configure it using the button. ● You can select High, Medium or Low to determine the sound quality for Voice recording. Voice recording ► Audio recording ► Video recording ► Quality ► Reset record number Audio recording ● Select Audio recording using the + / – buttons, select Quality and configure it using the button.
Configuring the System Environment HDD capacity ● To view the HDD information, select the HDD capacity using the + / – buttons and press the button. ● Then you can view the total capacity and the usage of the current hard disk drive. HDD capacity Language TV signal Band of Radio Firmware version Firmware update ► ► ► ► Language ● To configure the language, select Language using the + / – buttons and press the button.
PORTABLE MEDIA PLAYER Band of Radio ● To configure the radio band, select Band of Radio using the + / – buttons and press the button. ● You can select Europe / US or Japan depending on your location. ● Europe / US: You can search for a channel in 100 KHz increments from the frequency range 87.5MHz to 108.0MHz. ● Japan: You can search for a channel in 100 KHz increments from the frequency range 76.0MHz to 108.0MHz.
Configuring the System Environment Firmware update ● You can upgrade the firmware according to the following procedures. HDD capacity Language TV signal Band of Radio Firmware version Firmware update ► ► ► ► To Download a New Version of the Firmware 1. Please connect to the website written in the manual cover. 2. Download the file to upgrade the firmware. - Do not rename the file. To Upgrade the Firmware 1. Before upgrading the firmware, connect the DC adapter. 2.
Troubleshooting I cannot turn the unit on. - Check whether the HOLD switch of the man body is in the HOLD position. - Check whether the battery is sufficiently charged. - Press and hold down Reset Hole for 3 seconds and then press the MENU button. The AC adapter does not work. - Check that the AC adapter is properly connected to the DC jack of the unit. The remote control does not work. - Check whether the HOLD switch of the remote control is in the HOLD position.
Troubleshooting I cannot see an image file. - An image file that is not supported by the product specifications may not be displayed. Check the product specifications. I cannot hear the sound or I hear noise. - Check whether the volume is “0”. - Check that the earphones and the remote control are properly connected and whether there are alien substances on the plug. Alien substances on the plug may cause noise.
Product Specifications General Product Specifications Item Audio Video FM Radio Play Time Power Supply General Supported Operating Systems Item Product Specifications Frequency Range 20Hz~20KHz Earphone Output Left 20mW + Right 20mW [16Ω] for max volume Signal to Noise Ratio 90dB [MP3] Frequency Property ±3dB Number of Channels Stereo [Left and Right] LCD 2.22 TFT 320 X 240 Color LCD Composite Output NTSC/PAL Frequency Range 87.5 MHz~108.
Product Specifications Play File Specifications Item Audio Video Video Recording Image ☞ Note Item Product Specifications File Format MPEG1/2/2.5 Layer3, WMA, WAV Bit Rate 8kbps~320kbps, CBR & VBR Tag ID3 V1, ID3 V2 2.0, ID3 V2 3.0 File Format AVI, MPG, MPEG Audio Format MPEG1/2/2.5, Layer3 Video Format MPEG-1, MPEG-2, DivX3.1/4.xx/5.
Exemption Clauses ● Rollei Fototechnic GmbH/Rollei Procurement Ltd. bears no responsibility in case of damages arising from fires not liable to Rollei affiliates, operation by the third parties, other accidents, or use under abnormal conditions, including erroneous or improper operation and other problems. ● Rollei Fototechnic GmbH/Rollei Procurement Ltd. bears no responsibility for incidental damages (lost profit, workinterruption, corruption or loss of the memory contents, etc.
MX2220.
