Operation Manual

Connecting to a PC
13
Connecting to a PC using the USB cable
Procedures to Check the USB Driver
● Windows 98/ME:
Control Panel → System → Device Manager → Disk Drive →
USB 2.0 Storage Devic/USB 2.0 Storage Device USB Device
● Windows 2000 (Professional):
Control Panel → System → Hardware → Device Manager →
Disk Drive → USB 2.0 Storage Device USB Device
● Windows XP (Professional):
Control Panel → System → Hardware → Device Manager →
Disk Drive → USB 2.0 Storage Device USB Device
1
Connect the DC adapter to the main body and switch it on.
● Since operating the unit in connection with a PC consumes more power than
during normal operation and insufficient unit power may cause data loss, you
need to connect the unit to the DC adapter.
2
Open the bottom cover of the main body and connect the USB 2.0 Port on the unit and
the USB port of the computer using the USB 2.0 cable.
● Do not disconnect the connected USB cable without completing the proper
procedures to prevent data loss or a system error on the PC or the PMP.
(See‘Disconnecting the USB Cable’.)
3
The ‘Searching for a new device’ message appears and the USB driver is installed.
The installation screen may not be displayed. Open the Device Manager and check
whether the device driver is properly installed.
4
When the USB driver is installed, “USB 2.0 Storage Device USB Device” will be displayed
in the [Device Manager].
5
If the USB driver has not been properly installed, install the USB driver manually
referring to “Installing the USB Driver Manually”.