Operation Manual

Installing the USB Driver Manually

If the USB driver has been properly installed, skip this section and go to “Downloading

and Uploading a File”on page 16. Follow the procedures below only when the USB driver

is not installed automatically.

When an Error Occurs while installing the USB Driver

Check the Device Manager.

● Windows 98/ME:

Control Panel → System → Device Manager

● Windows 2000 (Professional):

Control Panel → System → Hardware → Device Manager

● Windows XP (Professional):

Control Panel → System → Hardware → Device Manager

Check if there is a device marked by an exclamation mark or

question mark (represented as an Unknown Device or USB Device)

Double-click a device marked by an exclamation mark or question mark.

☞

Note

●

When the USB driver is not recognized in Windows 2000, Connect to windowsupdate.microsoft.com and download

and install the latest service pack.

●

The procedures to install the drive may vary depending on the model or settings of the computer.

In this case, ask your computer provider or service center about the installation procedures.

●

If the USB driver installation error occurs continuously, restart the computer and connect the USB cable again.

Select the driver and click [Driver Update].

Select Compatible Driver and click [Next].

