Operation Manual
17
P
ORTABLE
M
EDIA
P
LAYER
17
Disconnecting the USB Cable
When you finish transmitting the files, unplug the cable according to the procedures below.
Formatting
1
Double-click the green arrow in the notification area.
2
Select the USB device and press the [Stop] button.
When the
Stop Hardware Device screen appears, click the [OK] button
and remove the USB cable.
☞
Notice
●
Separating the cable while downloading or uploading files may cause data loss.
Make sure to finish all file operations before separating the cable.
It is recommended closing all opened file folders before removing the cable.
1
Select a removable disk, right-click, and select Format from the popup menu.
2
Press the [Start] button.
● All saved files are deleted.
● You can rename the removable disk in the volume label.
☞
Notice
●
The format operation deletes all folders and font files used by the unit.
After formatting, copy the PMP.exe file from the CD to the root
directory of the unit and double-click the file to generate the system
folders and font files. If you launch PMP.exe, MUSIC, MOVIE, and PHOTO
folders are created on the hard disk of the unit, and the UNICODEF.FON
font file is created. Since the UNICODEF.FON file is required for the proper
operation of the unit, make sure that this file is not deleted.
●
Note that the files on the disk will not be recovered after the format operation.