Operation Manual

Installing the Transcoder
22
To install the software

Before connecting the computer and the PMP, install the USB driver.
if the ‘Add New Hardware Wizard’appears, click the
[Cancel] button and install the USB driver.
Requirements
The software requires the following computer system requirements.
● Pentium 3 500MHz or faster ● Windows 98SE/ME/2000/XP
● 50MB of free hard disk drive space ● USB (2.0) Support
● CD-ROM Drive (2x or faster)
● 128MB of memory or larger (256MB or larger is recommended)
● DirectX 9.0 or later and a Graphic Cards with at least 8MB of video memory
(64MB or larger of video memory is recommended)
● When the software installation is complete, connect the unit to the computer and use
it according to the figure on the following page.





1
Insert the Installation CD into the CD-ROM drive.
The following figure will appear.
Double-click [Setup.exe].
2
Follow the instructions on each of the screens
and complete the installation.

