Operation Manual

Encoding a Video
28
Since pressing the RECORD

button during MUSIC/VIDEO/RADIO/PHOTO playback does not
start recording, press the

button to move to the previous menu and to the main menu.
1
Connect the out ports (3 RCA ports) of external video
equipment and the AV IN jack of the unit with the AV
cable. (Yellow: Video, White: Audio (Left), Red: Audio
(Right))
2
Press the RECORD

button on the left side of the unit.
3
Select VIDEO Recording using the + / – buttons and press the button to start video recording.
● Press the button to pause recording.
Press the
button once again to resume recording.
4
To stop recording, press the

button while recording voice.
● This returns to the previous menu and saves the recorded voice as a file.
☞
Note
●
After recording, the recorded files are automatically saved in the VIDEO folder within the RECORD folder of the
MOVIE menu. If the VIDEO folder does not exist, the VIDEO folder is automatically created.
●
The recorded video is saved as an AVI file in the sequence of VIDEO000, VIDEO001, and so on.
●
You can create up to 1000 files (000 ~ 999).
●
While recording, the volume cannot be changed.
●
When the memory is full, recording is automatically stopped.
●
For procedures to configure the visual quality of video, refer to page 51.
☞
Notice
●
When the remaining battery charge is too low, recording is not possible.
It is recommended connecting the unit to the adapter when recording video.
●
Adjust the volume of the external video equipment to an appropriate level before recording video.
If the volume is too high or low, the sound quality of the recorded video may not be good.
Yellow
Red
White


0:00:20
REC VIDEO000.AVI HIGH
Press PLAY to Start