User's Manual

C H A P T E R 2
I D L 3 I D C O N F I G U R A T I O N S
Product User Guide 9
Customising the iDL3ID
Settings
Sometimes it may be required to change the default setting of the iDL3ID according to personal preferences. The settings can be changed from the
control panel. To access the control panel, from the task bar select Start>Setting>Control Panel.
Touch screen Settings
When attempting to select a particular item with the stylus and another item is selected in error, then touch screen could need re-aligning.
To align the touch screen select Stylus from the control panel.
Figure 2-1: STYLUS SCREEN
Next, select the Calibration tab.
Figure 2-2: CALIBRATION TAB
Selecting Recalibrate starts the recalibration process.
Figure 2-3: ALIGN PROCESS SCREEN
Carefully press and briefly hold the stylus on the centre of the target as it moves around the screen.
The Double-Tap settings can be adjusted by following the instructions on screen on the Double-Tap tab.
Select OK to exit the Stylus settings or press the <ENTER> key on the keyboard.