User's Manual

C H A P T E R 3
N E T W O R K S , C O M M U N I C A T I O N S A N D C O N N E C T I O N S
Product User Guide 13
The USB cable provided is shown below.
Connect the cable to the Host PC (ensure that the PC is switch on and user logged in), connect the other end of the cable to the iDL3ID.
Switch the iDL3ID on, the Host PC will then detect the device on the USB port and attempt to install the drivers. If the Hardware Installation Wizard
does not find the drivers, then the wizard would prompt to be pointed to the drivers. In this case, point to the files copied above.
After the drivers are installed, Active Sync will automatically detect the iDL3ID
Transferring Files
To transfer files start Microsoft® ActiveSync on the Host PC by selecting Start>Programs>Microsoft ActiveSync. An icon will be put into the
system tray.
Connect the iDL3ID to the Host PC via the USB Cable and switch the iDL3ID on. ActiveSync will detect the iDL3ID and establish a connection.
When a connection is successfully established, the ActiveSync icon in the system tray will turn green like so.
To browse the files and folders on the iDL3ID: on the Host PC, right-click on the green ActiveSync icon and select Explore. A window will then be
opened showing the files and folder on then iDL3ID. One can now browse the folders, as one would normally do on in Windows Explorer. Files can
now be copied between the iDL3ID and the Host PC.
To terminate the connection simply disconnect the USB Cable between the two devices.
Host US
B Connection To PC
Device USB Connection To iDL
3ID