User Manual

U S I N G T H E I D L 7 5 0
Product User Guide
17
Charger LED Indicators
The battery charger uses two LED‟s visible in the charger‟s Status Window to provide status information. One LED is to indicate the “Charging”
status and one is to indicate an “Error” status:
Green Flashing: Battery Charging
Green Solid: Battery Fully Charged
Red Solid: Error
Using the battery in your IDL750
Insert the battery into the IDL750
STEP 1: loosen Battery cover screws by STEP 2: Remove Battery cover STEP 3: Fit the charged batteries
turning screws anti-clock-wise into the slots with the
5-way connector facing
forward and downwards
STEP 4: Re-attach the Battery cover securely and tighten screws by turning them Clock wise.
It is recommended to Switch off the IDL750 before removing the batteries.
Before using the IDL750 for the first time the removable external batteries MUST be charged. The initial charging cycle for
both batteries is approximately five (5) hours. Subsequent charging cycles will take up to a maximum of two and a half
hours.
Using the normal Power down option before removing both batteries will ensure that application data are stored safely. If
both batteries are removed from the IDL750 without it being powered down first normally, non-persistent application data
will be lost.