User Manual

U S I N G T H E I D L 7 5 0
Product User Guide
22
Operating your IDL750
IDL750 Front Panel
Switching on the IDL750
To switch the IDL750 on, insert at least one charged battery into the IDL750. Hold the <POWER> key down for one to two seconds and
release. A Green LED to the left of the <POWER> key and underneath the “light bulb” image will turn on indicating that the IDL750 is in
operation. The display backlight will turn on and the IDL750 will then boot up displaying various boot-up sequence information. While the Microsoft ®
Windows XP Pro for Embedded Systems operating system is being loaded into the IDL750 memory, the “hard disk activity” LED will show be turning
on and off indicating hard disk activity.
From a complete shutdown state, the IDL750 takes approximately thirty five seconds to turn
on and load the operating system, during which a Microsoft ® Windows XP start-up sound will be
heard. This duration is depending on custom 3
rd
party applications and configurations.
From a standby state, the IDL750 takes less than five second to turn on.
Switching off the IDL750
To switch the IDL750 off, make use of the Windows XP “Start” menu and select the “Turn Off Computer…” option. From there the user can select to
turn the IDL750 off or put it into a Standby state. Alternatively, the user can hold the <POWER> key down for two to three seconds. This will
turn the IDL750 off performing a complete shutdown process.
When the IDL750 is in a standby state, a Red LED to the left of the <POWER> key will flicker
intermittently indicating that the device is in standby mode.