User Manual

U S I N G T H E I D L 7 5 0
Product User Guide
25
Using BHC Power Manager
The “BHC Power Manager” utility is used to manage the IDL750 peripheral‟s power.
When switching the IDL750 on from a complete “Off” state (i.e. not in Standby mode), all the device peripheral components will be in an “Off” state.
To make use of them, they are to be powered on. This can be done programmatically or manually. To do this programmatically, refer to the BC100
SDK (Software Development Kit) documentation for details.
Manually turn any of the IDL750‟s peripherals on by opening the “BHC Power Manager” utility from the System tray, tapping on the “MaxID Power
Manager icon”: or pressing the <PM> button on the keyboard.
Tap on the desired peripheral to power it “On”. Tap on the desired peripheral again to power it “Off”.
For some peripheral devices, the BHC Power Manager allows the user to configure further settings.
The BHC Power Manager also allows the user to manually configure applications or utilities to be executed when a user press one of the <APP>
keys:
<APP1> ,
<APP2> ,
<APP3> or
<APP4> .
On the BHC Power Manager utility, select the “Function keys” menu item. This will provide a window in which the user can enter a desired
application to be executed on the press of a <APP> key. To browse for an application, from the “Function keys” window, either tap on the applicable
<APP> key icon, or double tap in the field next to the applicable <APP> key icon.