User guide

UG_6613_ 040 6613_PSU_1+1S_URT_V1_00 Firmware Description Document
Rev. 1.0 33
Voltage
D4
SAG Voltage Alarm Threshold
D5 Min Voltage Alarm Threshold
D6 Max Voltage Alarm Threshold
Unused
D7 Unused
Current
D8
Unused
D9 Max Current Alarm Threshold
Power Factor
DA
Unused
DB
Unused
DC Power Factor Alarm - Threshold
DD Power Factor Alarm + Threshold
Unused
DE-DF Unused
Unused
E0 – E5 Unused
Alarm Mask for Status Regs
E6
Alarm Mask for Status
Alarm Mask for Alarm DI/O
E7
Alarm Mask for Alarm DIO
AC Cycle Count for CAL
EF AC Cycle Count for Calibration.
Reserved
F0
Reserved
Min/Max Controls
F1
Min/Max Controls
Clear Control
F2
Accumulator and Counter Clear. Power Factor Polarity
Table 7: CE Input Summary Chart
Calibration
08
Calibration Gain IA
09 Unused
0A Calibration Gain VA
0B Unused
Phase Compensation
0C
Phase Adjust IA
0D Unused
CE Configuration
0E
CE State
Pulse Rate
0F
WRATE
10 Reserved
SAG Threshold
11
SAG Threshold
Quantization Corrections
12
Quantization offset Watts
13-15 Unused
16 Quantization offset IA
17 Unused
Accumulation Interval
18
AC Cycle Count for Accumulation Interval
Gain Adjust
19
Temperature Gain Adjust