Datasheet

71M6513/71M6513H

3-Phase Energy Meter IC

DATA SHEET

SEPTEMBER 2011

A Maxim Integrated Products Brand

Flash Programming

Operational or test code can be programmed into the flash memory using either an in-circuit emulator or the Flash Download

Board Module (FDBM) available from Teridian. The flash programming procedure uses the E_RTS, E_RXTX, and E_TCLK

pins.

MPU Firmware Library

All application-specific MPU functions mentioned above under “Application Information” are available from Teridian as a

standard ANSI C library and as ANSI “C” source code. The code is available as part of the Demonstration Kit for the 71M6513

and 71M6513H ICs. The Demonstration Kits come with the 71M6513 or 71M6513H IC preprogrammed with demo firmware

mounted on a functional sample meter PCB (Demo Board). The Demo Boards allow for quick and efficient evaluation of the IC

without having to write firmware or having to supply an in-circuit emulator (ICE).

A reference guide for firmware development on the 71M6513 and 71M6513H is available as a separate document (Software

User’s Guide, “SUG”). The User’s Manuals supplied with the Demo Kits contain MPU address maps for the demo code as well

as other useful information, such as sample calibration procedures.