Datasheet

71M6543F/71M6543G Data Sheet
v2 103
Name Location
Rst
Wk Dir Description
CHOPR[1:0]
2709[7:6]
00 00 R/W
The CHOP settings for the remote sensor.
00 = Auto chop. Change every MUX frame.
01 = Positive
10 = Negative
11 = Auto chop (same as 00)
DIFF0_E
210C[4]
0
0
R/W
Enables IADC0-IADC1 differential configuration.
DIFF2_E
210C[5]
0
0
R/W
Enables IADC2-IADC3 differential configuration.
DIFF4_E
210C[6]
0
0
R/W
Enables IADC4-IADC5 differential configuration.
DIFF6_E
210C[7]
0
0
R/W
Enables IADC6-IADC7 differential configuration.
DIO_R2[2:0]
DIO_R3[2:0]
DIO_R4[2:0]
DIO_R5[2:0]
DIO_R6[2:0]
DIO_R7[2:0]
DIO_R8[2:0]
DIO_R9[2:0]
DIO_R10[2:0]
DIO_R11[2:0]
DIO_RPB[2:0]
2455[2:0]
2455[6:4]
2454[2:0]
2454[6:4]
2453[2:0]
2453[6:4]
2452[2:0]
2452[6:4]
2451[2:0]
2451[6:4]
2450[2:0]
0
0
0
0
0
0
0
0
0
0
0
– R/W
Connects PB and dedicated I/O pins DIO2 through DIO11 to internal resources. If more
than one input is connected to the same resource, the MULTIPLE column below specifies
how they are combined.
DIO_Rx
Resource
MULTIPLE
0
NONE
–
1
Reserved
OR
2
T0 (Timer0 clock or gate)
OR
3
T1 (Timer1 clock or gate)
OR
4
IO interrupt (int0)
OR
5
IO interrupt (int1)
OR
DIO_DIR[15:12]
DIO_DIR[11:8]
DIO_DIR[7:4]
DIO_DIR[3:0]
SFR B0[7:4]
SFR A0[7:4]
SFR 90[7:4]
SFR 80[7:4]
F F R/W
Programs the direction of the first 16 DIO pins. 1 indicates output. Ignored if the pin is
not configured as I/O. See DIO_PV and DIO_PW for special option for DIO0 and DIO1
outputs. See DIO_EEX[1:0] for special option for SEGDIO2 and SEGDIO3. Note that
the direction of DIO pins above 15 is set by SEGDIOx[1]. See PORT_E to avoid power-
up spikes.
DIO[15:12]
DIO[11:8]
DIO[7:4]
DIO[3:0]
SFR B0[3:0]
SFR A0[3:0]
SFR 90[3:0]
SFR 80[3:0]
F F R/W
The value on the first 16 DIO pins. Pins configured as LCD read zero. When written,
changes data on pins configured as outputs. Pins configured as LCD or input ignore
writes. Note that the data for DIO pins above 15 is set by SEGDIOx[0].