User Manual

UG_1x22_053 73M1822/73M1922 Control Module User Guide
Rev. 1.0 79
7.14 Line Measurement Related Data Types and Structures
7.14.1 M1X22_MEASURE_ENTITY
Description
This is the enumerated list of line measuring entities that can be monitored by the driver.
Prototype
typedef enum
{
M1X22_MEASURE_ENTITY_CURRENT = 0,
M1X22_MEASURE_ENTITY_VOLTAGE = 1,
}
M1X22_MEASURE_ENTITY;
Parameters
Name Value Description
M1X22_MEASURE_ENTITY_CURRENT
0
Line current measuring entity.
M1X22_MEASURE_ENTITY_VOLTAGE
1
Line voltage measuring entity.
7.14.2 M1X22_MEASURE_ACTION
Description
This is the enumerated list of possible request actions that can be performed on Interval and Event Table
(IET). See M1X22_IET_t for a description of the IET table.
Prototype
typedef enum
{
M1X22_MEASURE_ACTION_GET = 0,
M1X22_MEASURE_ACTION_SET = 1,
M1X22_MEASURE_ACTION_SET = 2
}
M1X22_MEASURE_ACTION;
Parameters
Name Value Description
M1X22_MEASURE_ACTION_GET
0
Read the IET table entry.
M1X22_MEASURE_ACTION_SET
1
Update the IET table entry.
M1X22_MEASURE_ACTION_CLEAR
2
Disable the IET table entry.