Datasheet

73S1215F Data Sheet DS_1215F_003
116 Rev. 1.4
Parameter Condition Min Typ. Max Unit
C
L
= 50pf, series 24Ω, 1% source termination resistor included
Rise Time USBTR 10% to 90% 4 20 ns
Fall Time USBTF 90% to 10% 4 20 ns
Rise/fall time matching TRFM (USBTR/USBTF) 90 111.11 %
Output signal crossover
voltage
VCRS Includes VDI range 1.3 2.0 V
Source Jitter to Next
Transition
TDJ1
Measured as in Figure
7-49 of USB 2.0 Spec
-3.5 3.5 ns
Source Jitter For Paired
Transitions
TDJ2
Measured as in Figure 7-
49 of USB 2.0 Spec (1) (2)
-4 4 ns
Receiver Jitter to Next
Transition
TJR1
Measure as in Figure 7-51
of USB 2.0 Spec.
Characterized but not
production tested.
-18.5 18.5 ns
Receiver Jitter for Paired
Transitions
TJR2
Measure as in Figure 7-51
of USB 2.0 Spec.
Characterized but not
production tested.
-9 9 ns
Source SE0 interval of
EOP
TEOPT
Figure 7-50 of USB 2.0
Spec
160 175 ns
Receiver SEO interval of
EOP
TEOPR
Figure 7-50 of USB 2.0
Spec. (3)
82 ns
(1) For both transitions of differential signaling.
(2) Excluding first transition from the Idle state.
(3) Must accept as valid EOP.