Datasheet

73S8010R Data Sheet DS_8010R_022
8 Rev. 1.6
2 Electrical Specifications
This section provides the following:
 Absolute Maximum Ratings
 Recommended Operating Conditions
 Smart Card Interface Requirements
 Digital Signals Characteristics
 DC Characteristics
 I2C Interface Characteristics
 Voltage / Temperature Fault Detection Circuits
2.1 Absolute Maximum Ratings
Table 2 lists the maximum operating conditions for the 73S8010R. Permanent device damage may occur
if absolute maximum ratings are exceeded. Exposure to the extremes of the absolute maximum rating for
extended periods may affect device reliability.
Table 2: Absolute Maximum Device Ratings
Parameter Rating
Supply voltage V
DD
-0.5 to 6.0 VDC
Supply voltage V
PC
-0.5 to 6.0 VDC
Input voltage for digital inputs -0.3 to (V
DD
+0.5) VDC
Storage temperature -60 °C to +150 °C
Pin voltage (except card interface) -0.3 to (V
DD
+ 0.5) VDC
Pin voltage (card interface) -0.3 to (V
CC
+ 0.5) VDC
ESD tolerance – Card interface pins +/- 6 kV
ESD tolerance – Other pins +/- 2 kV
Note: ESD testing on smart card pins is HBM condition, 3 pulses, each polarity referenced to ground.
2.2 Recommended Operating Conditions
Function operation should be restricted to the recommended operating conditions specified in Table 3.
Table 3: Recommended Operating Conditions
Parameter Rating
Supply voltage V
DD
2.7 to 5.5 VDC
Supply voltage V
PC
4.75 to 5.5 VDC
Ambient operating temperature -40 °C to +85 °C
Input voltage for digital inputs 0 V to V
DD
to +0.3 V