Datasheet

78M6610+PSU Data Sheet
3.7.4 AlarmSet Register (address 0x0C)
The AlarmSet register is used to force an alarm by setting the corresponding bit. This register is mainly
used for relay control and system test purposes.
Table 3-11: AlarmSet Register Bit Assignments
Bit
Alarm/
Status
Default Function
23 DataReady 0 1 = Force Alarm; 0 = No Operation
22 OverTemp 0 1 = Force Alarm; 0 = No Operation
21 UnderTemp 0 1 = Force Alarm; 0 = No Operation
19 ExtOvTemp1 0 1 = Force Alarm; 0 = No Operation
18 ExtOvTemp2 0 1 = Force Alarm; 0 = No Operation
17-12 Not Used – Not used
11 Vsag 0 1 = Force Alarm; 0 = No Operation
10 Vsurge 0 1 = Force Alarm; 0 = No Operation
9 VdropOut 0 1 = Force Alarm; 0 = No Operation
8 OverVolt 0 1 = Force Alarm; 0 = No Operation
7 UnderVolt 0 1 = Force Alarm; 0 = No Operation
6 OverCurrent 0 1 = Force Alarm; 0 = No Operation
5 OverPower 0 1 = Force Alarm; 0 = No Operation
4 OverFreq 0 1 = Force Alarm; 0 = No Operation
3 UnderFreq 0 1 = Force Alarm; 0 = No Operation
2 Relay_On 0 1 = Force Alarm; 0 = No Operation
1 Zero_Cross 0 1 = Force Alarm; 0 = No Operation
0 Not Used – Not used
34 Rev 3