Datasheet

78M6610+PSU Data Sheet
5 Electrical Specifications
5.1 Absolute Maximum Ratings
Supplies and Ground Pins:
V
3P3D
, V
3P3A
-0.5V to 4.6V
GNDD, GNDA -0.5V to +0.5V
Analog Input Pins:
AVN, AVP, AIN, AIP, ATEMP1, ATEMP2
-10mA to +10mA
-0.5V to (V
3P3
+ 0.5V)
Oscillator Pins:
XIN, XOUT
-10mA to +10mA
-0.5V to +3.0V
Digital Pins:
IFCONFIG, ACFAULT, ADDR1, SSB/DIR/SCL, ACCRIT;SDO/TX/SDAo,
SDI/RX/SDAi, ADDR0, RELAYCTRL, MP0, MP1, RESET
-30mA to +30mA,
-0.5V to (V
3P3D
+ 0.5V)
Temperatures:
Operating Junction Temperature (peak, 100ms) +140°C
Operating Junction Temperature (continuous) +125°C
Storage Temperature -65°C to +150°C
Soldering Temperature (10-second duration) +250°C
ESD Stress on All Pins ±4kV
Stresses beyond Absolute Maximum Ratings may cause permanent damage to the device. These are
stress ratings only and functional operation at these or any other conditions beyond those indicated under
“recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for
extended periods may affect device reliability. All voltages are with respect to GND.
5.2 Recommended External Components
Name From To Function Value Unit
XTAL XIN XOUT 20.000MHz 20.000 MHz
CXS XIN GND
Load capacitor for crystal (exact value
depends on crystal specifications and
parasitic capacitance of board).
18±10%
pF
CXL XOUT GND
18±10%
pF
5.3 Recommended Operating Conditions
Parameter Condition Min Typ Max Unit
3.3V Supply Voltage (V
3P3
) Normal Operation 3.0 3.3 3.6 V
Operating Temperature -40 – +85 ºC
Rev 3 55