Datasheet

78M6612 Data Sheet DS_6612_001
46 Rev 2
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit
patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408- 737- 7600
 2012 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products.
Revision History
REVISION DATE DESCRIPTION
1.0 4/1/2009
First publication.
1.3 5/7/2010
Moved firmware specific information to respective developers manuals.
Added Caution to Section 1.4.6: “Caution. If UART1 is being used for full
duplex operation, TX interrupts may be inadvertently cleared and thus a
TX safety timer is recommended.”
Added Caution to Section 1.4.6 about UART0 interrupts.
In Section 3.10, changed “I/O RAM register TX1DIS” to “I/O RAM register
TX1E”.
In Figure 18, corrected the name of pin 45 from “RX” to “RX0”.
2
1/12
Added Maxim logo.