Datasheet

DG201A/DG211
Quad SPST CMOS Analog Switches
_______________________________________________________________________________________ 3
ABSOLUTE MAXIMUM RATINGS (DG201A)
Voltages Reference to V-
V+………………………………………………..……………..44V
GND……………………………………………..……….…….25V
Digital Inputs (Note 1), V
S
, V
D
............................-2V to (V+ + 2V)
or 20mA, whichever occurs first
Current, Any Terminal Except S or D………..….…………...30mA
Continuous Current, S or D…………………………………...20mA
Peak Current, S or D
(pulsed at 1ms 10% duty cycle max)…………………….70mA
Operating Temperature Range
DG201AA.............…………........………..…...-55°C to +125°C
DG201AD/E .........………………….....…..….…-40°C to +85°C
DG201AC .............………........................…….…0°C to +70°C
Storage Temperature Range………………..…..-65°C to +150°C
Power Dissipation (Note 2)
16-Pin Plastic Dip (derate 10.5mW/°C above +70°C) ...842mW
16-Pin SO (derate 8.7mW/°C above +70°C) .................696mW
16-Pin TSSOP (derate 9.4mW/°C above +70°C) ...........755mW
16-Pin QFN (5
✕ 5)
(derate 19.2mW/°C above +70°C)...........................1538mW
16-Pin CERDIP (derate 10.0mW/°C above +70°C)......800mW
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
DG201AA DG201AC, D, E
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX MIN TYP MAX
UNITS
SWITCH
Analog Signal Range
V
ANALOG
-15 15 -15 15
V
Drain-Source ON Resistance
R
DS
(
ON
)
V
D
= ±10V, V
IN
= 0.8V, I
S
= 1mA
115 175 115 200
Ω
V
S
= 14V, V
D
= -14V 0.01 1.0 0.01 5.0
Source OFF-Leakage Current
I
S
(
OFF
)
V
IN
= 2.4V
V
S
= -14V, V
D
= 14V -1.0 -0.02 -5.0 -0.02
V
S
= 14V, V
D
= -14V 0.01 1.0 0.01 5.0
Drain OFF-Leakage Current
I
D
(
OFF
)
V
IN
= 2.4V
V
S
= -14V, V
D
= 14V -1.0 -0.02 -5.0 -0.02
V
S
= -14V
0.1 1.0 0.1 1.0
Drain ON-Leakage Current
(Note 4)
I
D
(
ON
)
V
IN
= 0.8V
V
S
= 14V
-1.0 -1.0
nA
ELECTRICAL CHARACTERISTICS (DG201A)
(V+ = +15V, V- = -15V, GND = 0, T
A
= +25°C, unless otherwise noted.) (For more information on TYP values see Note 3.)
ELECTRICAL CHARACTERISTICS (DG211) (continued)
(V+ = +15V, V- = -15V, GND = 0, T
A
= +25°C, unless otherwise noted.) (For more information on TYP values see Note 2.)
PARAMETER
SYMBOL
CONDITIONS MIN TYP
MAX
UNITS
SUPPLY
Positive Supply Current I
+
0.02 0.4
Negative Supply Current I
-
0.01 0.4
Logic Supply Current I
L
V
IN
= 0 and 2.4V (all)
00
mA
Power-Supply Range
for Continous Operation
V
OP
±4.5 ±18 V
Note 1: Signals on S
_
, D
_
, or IN
_
exceeding V
+
or V
-
on Maxim’s DG201A will be clamped by internal diodes, and are also internally cur-
rent limited to 25mA.
Note 2: Device mounted with all leads soldered to PC board.
Note 2: Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
Note 3: I
D(ON)
is leakage from driver into “ON” switch.
Note 4: OFF-Isolation = 20 log V
S
/V
D
, V
S
= input to OFF switch, V
D
= output.