Datasheet

1 of 7
GENERAL DESCRIPTION
The DS1100 series delay lines have five equally
spaced taps providing delays from 4ns to 500ns.
These devices are offered in surface-mount
packages to save PCB area. Low cost and
superior reliability over hybrid technology is
achieved by the combination of a 100% silicon
delay line and industry-standard µMAX and SO
packaging. The DS1100 5-tap silicon delay line
reproduces the input-logic state at the output after
a fixed delay as specified by the extension of the
part number after the dash. The DS1100 is
designed to reproduce both leading and trailing
edges with equal precision. Each tap can drive up
to 10 74LS loads.
Maxim can customize standard products to meet
special needs.
FEATURES
 All-Silicon Timing Circuit
 Five Taps Equally Spaced
 5V Operation
 Delays are Stable and Precise
 Both Leading- and Trailing-Edge Accuracy
 Improved Replacement for DS1000
 Low-Power CMOS
 TTL/CMOS-Compatible
 Vapor-Phase, IR, and Wave Solderable
 Custom Delays Available
 Fast-Turn Prototypes
 Delays Specified Over Both Commercial and
Industrial Temperature Ranges
PIN ASSIGNMENT
PIN DESCRIPTION
TAP 1 to TAP 5 - TAP Output Number
V
CC
- +5V
GND - Ground
IN - Input
DS1100
5-Tap Economy Timing
Element (Delay Line)
19-5735; Rev 3/11
1
2
3
4
8
7
6
5
V
CC
TAP 1
TAP 3
TAP 5
IN
TAP 2
TAP 4
GND
DS1100Z SO (150 mils)
DS1100U µMAX®
µ
MAX is a registered trademark of Maxim Integrated Products, Inc.