Datasheet

DS1878
SFP+ Controller with Digital LDD Interface
56 ______________________________________________________________________________________
Table 01h, Register FAh: ALARM EN
1
POWER-ON VALUE 00h
READ ACCESS PW2 or (PW1 and RWTBL1C) or (PW1 and RTBL1C)
WRITE ACCESS PW2 or (PW1 and RWTBL1C)
MEMORY TYPE Nonvolatile (SEE)
FAh RESERVED RESERVED RESERVED RESERVED HBAL RESERVED TXP HI TXP LO
BIT 7 BIT 0
Layout is identical to ALARM
1
in Lower Memory, Register 72h. Enables alarms to create internal signal FETG (see
Figure 15) logic. The MASK bit (Table 02h, Register 89h) determines whether this memory exists in Table 01h or
05h.
BITS 7:4 RESERVED
BIT 3
HBAL:
0 = Disables interrupt from HBAL alarm.
1 = Enables interrupt from HBAL alarm.
BIT 2 RESERVED
BIT 1
TXP HI:
0 = Disables interrupt from TXP HI alarm.
1 = Enables interrupt from TXP HI alarm.
BIT 0
TXP LO:
0 = Disables interrupt from TXP LO alarm.
1 = Enables interrupt from TXP LO alarm.