Datasheet

DS1878
SFP+ Controller with Digital LDD Interface
______________________________________________________________________________________ 57
Table 01h, Register FBh: ALARM EN
0
POWER-ON VALUE 00h
READ ACCESS PW2 or (PW1 and RWTBL1C) or (PW1 and RTBL1C)
WRITE ACCESS PW2 or (PW1 and RWTBL1C)
MEMORY TYPE Nonvolatile (SEE)
FBh LOS HI LOS LO RESERVED RESERVED BIAS MAX RESERVED RESERVED RESERVED
BIT 7 BIT 0
Layout is identical to ALARM
0
in Lower Memory, Register 73h. The MASK bit (Table 02h, Register 89h) determines
whether this memory exists in Table 01h or 05h.
BIT 7
LOS HI: Enables alarm to create TXFINT (Lower Memory, Register 71h) logic.
0 = Disables interrupt from LOS HI alarm.
1 = Enables interrupt from LOS HI alarm.
BIT 6
LOS LO: Enables alarm to create TXFINT (Lower Memory, Register 71h) logic.
0 = Disables interrupt from LOS LO alarm.
1 = Enables interrupt from LOS LO alarm.
BITS 5:4 RESERVED
BIT 3
BIAS MAX: Enables alarm to create internal signal FETG (see Figure 15) logic.
0 = Disables interrupt from BIAS MAX alarm.
1 = Enables interrupt from BIAS MAX alarm.
BITS 2:0 RESERVED