Datasheet

DS28E15
DeepCover Secure Authenticator with
1-Wire SHA-256 and 512-Bit User EEPROM
ABRIDGED DATA SHEET
General Description
DeepCover™ embedded security solutions cloak sensi-
tive data under multiple layers of advanced physical
security to provide the most secure key storage possible.
The DeepCover Secure Authenticator (DS28E15) com-
bines crypto-strong bidirectional secure challenge-and-
response authentication functionality with an imple-
mentation based on the FIPS 180-3-specified Secure
Hash Algorithm (SHA-256). A 512-bit user-program-
mable EEPROM array provides nonvolatile storage of
application data. Additional protected memory holds a
read-protected secret for SHA-256 operations and set-
tings for memory protection control. Each device has
its own guaranteed unique 64-bit ROM identification
number (ROM ID) that is factory programmed into the
chip. This unique ROM ID is used as a fundamental input
parameter for cryptographic operations and also serves
as an electronic serial number within the application. A
bidirectional security model enables two-way authen-
tication between a host system and slave-embedded
DS28E15. Slave-to-host authentication is used by a host
system to securely validate that an attached or embed-
ded DS28E15 is authentic. Host-to-slave authentication is
used to protect DS28E15 user memory from being modi-
fied by a nonauthentic host. The DS28E15 communicates
over the single-contact 1-Wire
M
bus at overdrive speed.
The communication follows the 1-Wire protocol with the
ROM ID acting as node address in the case of a multide-
vice 1-Wire network.
Applications
Authentication of Consumables
Secure Feature Control
Features
S Symmetric-Key-Based Bidirectional Secure
Authentication Model Based on SHA-256
S Strong Authentication with a High-Bit-Count User-
Programmable Secret and Input Challenge
S 512 Bits of User EEPROM Partitioned Into Two
Pages of 256 Bits
S User-Programmable and Irreversible EEPROM
Protection Modes Including Authentication, Write
and Read Protect, and OTP/EPROM Emulation
S Unique Factory-Programmed, 64-Bit Identification
Number
S Single-Contact 1-Wire Interface
S Operating Range: 3.3V ±10%, -40°C to +85°C
S ±8kV HBM ESD Protection (typ)
S 2-Pin SFN, 6-Pin TDFN-EP, and 6-Pin TSOC
Packages
Typical Application Circuit
219-0018; Rev 2; 12/12
Ordering Information appears at end of data sheet.
DeepCover is a trademark and 1-Wire is a registered trademark of Maxim Integrated Products, Inc.
For related parts and recommended products to use with this part, refer to: www.maximintegrated.com/DS28E15.related
SDA
V
CC
SCL
SLPZ IO
R
P
R
P
= 1.1k
MAXIMUM I
2
C BUS CAPACITANCE 320pF
3.3V
1-Wire LINE
µC
(I
2
C PORT)
DS2465
DS28E15
For pricing, delivery, and ordering information, please contact Maxim Direct at
1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.

Summary of content (5 pages)