Instruction Manual

DS33R11 Ethernet Mapper with Integrated T1/E1/J1 Transceiver
148 of 344
Register Name:
BSRL
Register Description:
BERT Status Register Latched
Register Address:
8Eh
Bit # 7 6 5 4 3 2 1 0
Name - - - - PMSL
BEL BECL OOSL
Default - - - - - - - -
Bit 3: Performance Monitor Update Status Latched (PMSL) This bit is set when the PMS bit transitions from 0
to 1.
Bit 2: Bit Error Detected Latched (BEL) This bit is set when a bit error is detected.
Bit 1: Bit Error Count Latched (BECL) This bit is set when the BEC bit transitions from 0 to 1.
Bit 0: Out Of Synchronization Latched (OOSL) This bit is set when the OOS bit changes state.
Register Name:
BSRIE
Register Description:
BERT Status Register Interrupt Enable
Register Address:
90h
Bit # 7 6 5 4 3 2 1 0
Name - - - - PMSIE BEIE BECIE OOSIE
Default 0 0 0 0 0 0 0 0
Bit 3: Performance Monitoring Update Status Interrupt Enable (PMSIE) This bit enables an interrupt if the
PMSL bit is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 2: Bit Error Interrupt Enable (BEIE) This bit enables an interrupt if the BEL bit is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 1: Bit Error Count Interrupt Enable (BECIE) This bit enables an interrupt if the BECL bit is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 0: Out Of Synchronization Interrupt Enable (OOSIE) This bit enables an interrupt if the OOSL bit is set.
0 = interrupt disabled
1 = interrupt enabled