Instruction Manual

DS33R11 Ethernet Mapper with Integrated T1/E1/J1 Transceiver
163 of 344
Register Name:
LI.RPPSRL
Register Description:
Receive Packet Processor Status Register Latched
Register Address:
105h
Bit # 7 6 5 4 3 2 1 0
Name
REPL RAPL RIPDL RSPDL RLPDL REPCL RAPCL RSPCL
Default - - - - - - - -
Bit 7: Receive FCS Errored Packet Latched (REPL) This bit is set when a packet with an errored FCS is
detected.
Bit 6: Receive Aborted Packet Latched (RAPL) This bit is set when a packet with an abort indication is detected.
Bit 5: Receive Invalid Packet Detected Latched (RIPDL) This bit is set when a packet with a noninteger number
of bytes is detected.
Bit 4: Receive Small Packet Detected Latched (RSPDL) This bit is set when a packet smaller than the minimum
packet size is detected.
Bit 3: Receive Large Packet Detected Latched (RLPDL) This bit is set when a packet larger than the maximum
packet size is detected.
Bit 2: Receive FCS Errored Packet Count Latched (REPCL) This bit is set when the REPC bit in the RPPSR
register transitions from zero to one.
Bit 1: Receive Aborted Packet Count Latched (RAPCL) This bit is set when the RAPC bit in the RPPSR register
transitions from zero to one.
Bit 0: Receive Size Violation Packet Count Latched (RSPCL) This bit is set when the RSPC bit in the RPPSR
register transitions from zero to one.