Instruction Manual

DS33R11 Ethernet Mapper with Integrated T1/E1/J1 Transceiver
167 of 344
Register Name:
LI.RAPCB0
Register Description:
Receive Aborted Packet Count Byte 0 Register
Register Address:
110h
Bit # 7 6 5 4 3 2 1 0
Name RAPC7 RAPC6 RAPC5 RAPC4 RAPC3 RAPC2 RAPC1 RAPC0
Default 0 0 0 0 0 0 0 0
Bits 0 - 7: Receive Aborted Packet Count (RAPC [7:0]) Eight bits of a 24-bit value. Register description below.
Register Name:
LI.RAPCB1
Register Description:
Receive Aborted Packet Count Byte 1 Register
Register Address:
111h
Bit # 7 6 5 4 3 2 1 0
Name
RAPC15 RAPC14 RAPC13 RAPC12 RAPC11 RAPC10 RAPC9 RAPC8
Default 0 0 0 0 0 0 0 0
Bits 0 - 7: Receive Aborted Packet Count (RAPC[15:8]) Eight bits of a 24-bit value. Register description below.
Register Name:
LI.RAPCB2
Register Description:
Receive Aborted Packet Count Byte 2 Register
Register Address:
112h
Bit # 7 6 5 4 3 2 1 0
Name
RAPC23 RAPC22 RAPC21 RAPC20 RAPC19 RAPC18 RAPC17 RAPC16
Default 0 0 0 0 0 0 0 0
Bits 0 – 7: Receive Aborted Packet Count (RAPC [23:16]) The twenty-four bit value from these three registers
indicates the number of packets received with a packet abort indication. The byte count for these packets is
included in the receive aborted byte count register REBCR.