Instruction Manual

DS33R11 Ethernet Mapper with Integrated T1/E1/J1 Transceiver
177 of 344
Register Name:
SU.MACAWH
Register Description:
MAC Address Write High
Register Address:
14Bh
Bit # 7 6 5 4 3 2 1 0
Name
MACAW 15 MACAW 14 MACAW 13 MACAW12 MACAW11 MACAW10 MACAW9 MACAW8
Default 0 0 0 0 0 0 0 0
Bits 0 – 7: MAC Write Address (MACAW8-15) High byte of the MAC indirect write address. Used only for write
operations.
Register Name:
SU.MACRWC
Register Description:
MAC Read Write Command Status
Register Address:
14Ch
Bit # 7 6 5 4 3 2 1 0
Name - - - - - - MCRW MCS
Default 0 0 0 0 0 0 0 0
Bit 1: MAC Command RW (MCRW) If this bit is written to 1, a read is performed from the MAC. If this bit is written
to 0, a write operation is performed. Address information for write operations must be located in
SU.MACAWH and
SU.MACAWL. Address information for read operations must be located in SU.MACRADH and SU.MACRADL. The
user must also write a 1 to the MCS bit, and the DS33R11 will clear MCS when the operation is complete.
Bit 0: MAC Command Status (MCS) Setting MCS in conjunction with MCRW will initiate a read or write to the
MAC registers. Upon completion of the read or write this bit is cleared. Once a read or write command has been
initiated the host must poll this bit to see when the operation is complete.